Tips for adjusting bearing clearance
1. The backlash of cylindrical and elliptical bearings can be adjusted by hand-scraping or by lapping in the bearing after lapping. .
2. For the top clearance of cylindrical and elliptical bearings, the method can be adjusted by means of hand-scraping or when the situation permits. .
3. For multiple oil wedge fixed bearing bushes, it is not allowed to shave and adjust bearing gaps in principle. Replace the new ones if the clearance is not appropriate. .
4. For multi-oil wedge tilting bearing bushes, it is not allowed to repair the brake pads. If the clearance is not suitable, replace the pads. For tiles with adjustable thickness, the bush can be adjusted by adding a stainless steel pad underneath the tile adjustment block or by reducing the block thickness. Note that for multiple oil wedge tilting bearings, the thickness difference between the same group of tiles should be less than 0.01mm.